Metaheuristic Optimization Strategies for Synthetic Inertia and Load Frequency Control in Islanded Microgrids: A Comprehensive Review

DESIGN AND SIMULATION OF ARTIFICIAL INTELLIGENCE-BASED ADAPTIVE PROTECTION SCHEME FOR NIGERIA'S POWER GRIDS USING BIG DATA ANALYTICS

Mission-Aware Optimization of Deployable Renewable Energy Systems for Critical Rural Services in Nigeria: A Reconfiguration Framework

Small-Signal Stability Assessment of DFIG-Based Wind Energy Integration in STATCOM-Compensated Nigerian Transmission Network: A Modal Analysis Approach

INTEGRATION OF CNN-LSTM SHORT-TERM LOAD FORECASTING INTO DISTRIBUTION NETWORK OPERATIONAL PLANNING

IoT-Enabled Hybrid Solar–RF Energy Harvesting Framework for Batteryless Agricultural Monitoring Nodes: A Pathway to Sustainable Rural Development in Nigeria

THE EFFECTS OF CONCENTRATED SOLAR IRRADIANCE ON THE OVERALL PERFORMANCE OF MONOCRYSTALLINE AND POLYCRYSTALLINE SOLAR CELLS

POWER TRANSFORMER INCIPIENT FAULT PREDICTION USING DISSOLVED GAS ANALYSIS AND ARTIFICIAL BEE COLONY OPTIMIZED RANDOM FOREST MODEL

Conceptual Design, Operations, and Theoretical Modeling of a 1 kW Physical Scale Prototype for the Kainji Hydropower Dam

Design and Optimisation of a Shell and Tube Heat Exchanger using Particle Swarm Optimisation

EFFECT OF MUNICIPAL SOLID WASTE LEACHATE ON PLASTICITY CHARACTERISTICS OF CLAY SOIL

ENHANCING THE THERMAL PROPERTIES OF ASPHALT PAVEMENT FOR ELECTRICITY GENERATION USING THERMOELECTRIC GENERATORS.

THERMAL EVALUATION OF ASPHALT CONCRETE FOR PAVEMENT-BASED THERMOELECTRIC ENERGY GENERATION: INFLUENCE OF AGGREGATE TYPE AND GRADATION

Process Intensification of a 50 BPD Modular Mini-Refinery : A Simulation-Driven Pinch Analysis Approach for Enhanced Heat Recovery and Sustainable Refining in Nigeria.

MODIFICATION OF FORWARD AND REVERSE ELECTRIC MOTOR STARTERS

PERFORMANCE EVALUATION OF A PROTOTYPE THERMO-ELECTRIC GENERATOR (TEG) BASED ENERGY HARVESTER FROM ASPHALT PAVEMENTS

Design Optimisation and Impact Assessment of a Biogas-Integrated Anaerobic Baffled Reactor Wastewater Treatment System at Ikoyi Correctional Centre, Lagos, Nigeria

ASSESSING THE IMPACT OF CLIMATE CHANGE ON GROUNDWATER RECHARGE POTENTIAL IN PALLADAN, ZARIA, KADUNA STATE, NIGERIA.

Geo-spatial 2D analysis of Anthropogenic Heavy Metal Sources and Distribution in Soil and Groundwater In Funtua, Katsina State

Non-Parametric Assessment of Wind-Sector and Elevation Effects on Contaminant Distribution around a Cement Factory

Hydrodynamic Assessment of Piping-Induced Dam-Break and Downstream Flood Hazard Classification at Zobe Dam, Nigeria. An integrated HEC-HMS and HEC-RAS Modeling Approach

Climate-Resilient Infrastructure Design for Flood-Prone Nigerian Cities: A Case Study of Maiduguri, Borno State.

Flood Inundation Risk Assessment of An Earthen Dam Under Piping Failure Using HEC-RAS And QGIS: A Case Study of Kubanni Dam Zaria, Nigeria.

Integrated HEC-HMS and Improved Soil Moisture Balance Modelling for Groundwater Recharge Assessment in the Semi-Arid Sokoto Basin, Nigeria

Evaluation of Phosphorus Compound Enrichment and Eutrophication Risk of Alau Reservoir, Nigeria

Household Water Security and Integrated Water Resources Management Gaps in a Rapidly Urbanising Nigerian City: Evidence from Minna, Niger State

ESTIMATING GROUNDWATER RECHARGE IN THE BIDA BASIN USING INTEGRATED SOIL MOISTURE BALANCE AND HEC-HMS MODELLING, A CASE STUDY OF THE NEW- BUSSA SUB-BASIN

Physicochemical assessment of hospital waste water through clay membrane composite,a case study of general hospital minna

Hydrological Modelling and Time-Series Streamflow Forecasting of the Kiri Watershed Using SWAT and ARIMA Models

Assessment of Groundwater Quality and Irrigation Suitability in Jere LGA, Borno State: Engineering Solutions for Sustainable Agricultural Development in Nigeria

Development of a Cyclonic Liquid Spray Scrubber for Emission Control

Evaluation of the synergistic effect of Corncob Ash (CCA) and Date Palm Seed Ash (DPSA) as partial cement replacement on the mechanical properties of concrete.

STRUCTURAL RELIABILITY ASSESSMENT OF REINFORCED CONCRETE BEAM INCORPORATING GROUNDNUT SHELL ASH FOR TILAPIA CONCRETE INCUBATOR

Desirability-Based Multi-Response Optimization of Flexural Performance in Bamboo and Steel Reinforced Concrete Beams

Palm Fruit Bunch Ash as a Partial Cement Replacement in Sandcrete Block

PROBABILISTIC RELIABILITY ANALYSIS OF REINFORCED METAKAOLIN-BASED GEOPOLYMER CONCRETE BEAMS SUBJECTED TO VARIATIONS IN GEOPOLYMER MIX PARAMETERS

Reliability Analysis on Reinforced Concrete Column Containing Sawdust Ash for Structural Applications

The Use of Green Materials for Building Construction: A study of the Nigerian Construction Industry.

PHYSICO-MECHANICAL PROPERTIES OF SUSTAINABLE TERNARY BLENDED CONCRETE INCORPORATING CORN COB ASH AND RICE HUSK ASH AS PARTIAL CEMENT REPLACEMENTS

Mechanical and Durability Performance of Sustainable Concrete Incorporating Rice Husk Ash and 100% Recycled Concrete Aggregate

EFFECT OF POLYCARBONATE PLASTIC ON THE MECHANICAL PROPERTIES OF ASPHALT CONCRETE

Optimization and Predictive Modelling of Doum Palm Fibre-Reinforced Concrete Incorporating Rice Husk Ash

Effect of Superplasticizer Dosage on the Workability and Compressive Strength of Rice Husk Ash Modified Concrete

AN INVESTIGATION INTO THE PHYSICAL PROPERTIES OF METAKAOLIN-BASED GEOPOLYMER MODIFIED ASPHALT BINDER

AN EVALUATION OF THE MECHANICAL PROPERTIES OF SANDCRETE MORTAR CONTAINING POLYSTYRENE WASTE AND FLY ASH

Effect of Alkaline Pre-treatment on the Mechanical Strength and Biodegradation Behaviour of Coir Fibre Reinforced Concrete

Deep Learning-Based Weapon Recognition in Intelligent Surveillance Systems

Fault Classification in Transmission Line using ANN, Extreme Gradient Boosting and Random Forest Machine Learning Models.

INTERFERENCE MITIGATION OF UNDERLAY SECONDARY USERS USING INTERFERENCE ALIGNMENT

Deep Learning Network for Audio-Based Environmental Sound Recognition using YAMNet and Dense Self-Attention Mechanism

Improved Clustering Approach for Hotspot Mitigation in Wireless Sensor Networks Using Load-Aware Cluster Head Selection

CPS-Driven Adaptive Coordination Framework for Heterogeneous Wireless Sensor Networks in Dynamic and Uncertain Environments

Time of Arrival–Received Signal Strength Localization in Non-Line-of-Sight Environments Using Huber Loss Enhanced Second-Order Cone Programming

Extended Kalman Filter-Based State Estimation for Real-Time Glucose-Insulin Digital Twins in Type 1 Diabetes

DEVELOPMENT OF A YOLO – BASED OBJECT DETECTION MODEL FOR ESAL COMPUTATION IN VEHICLE TRAFFIC COUNT

EXPERIMENTAL ASSESSMENT OF SPECTRUM OCCUPANCY AND TVWS AVAILABILITY IN THE UHF TELEVISION BAND (470–694) MHz IN KANO STATE NIGERIA

Feature Selection Using Random Forest Feature Importance for Efficient Network Intrusion Detection on the NSL-KDD Dataset

Evolution, Prospects, and Future Directions of Nigerian Currency Image Analysis: A Decadal Review.

Fuzzy-Intelligent PID Control for Anode Pressure Regulation in PEMFC Systems: A Hardware-in-the-Loop Validation Study

Design And Performance Evaluation of An Intelligent UAV-Based Vision System For Automated Power Transmission Line Component Inspection Using YOLOv8s

Design and Implementation of an AI-Based Smart Medication Identification, Automated Dispensing, Timed Reminder, and Monitoring Dashboard System

Tribological Behaviour and Multi-Objective Optimization of Austempered High Carbon Steel Using Sulfate Salt-Modified Sesame Oil

Field-Validated Failure Analysis of Commercial Tricycles in Nigeria and the Potential of Agricultural Residue-Reinforced Aluminium Matrix Composites for Piston Durability Enhancement

AN ASSESSMENT OF WASTEPAPER MANAGEMENT IN A.B.U. MAIN CAMPUS, SAMARU

DYNAMIC MECHANICAL ANALYSIS OF RECYCLED LDPE/HDPE POLYMER BLENDS

EFFECT OF HEAT TREATMENT AND QUENCHING MEDIA ON THE MECHANICAL TRIBOLOGICAL THERMAL AND MICROSTRUCTURAL BEHAVIOUR OF A6082-SNSA/MWCNT HYBRID COMPOSITES

Mechanical, Optical and Engineering Assessment of Polypropylene/Fiberglass Composites for Translucent LPG Cylinder Applications

Development and Characterization of Hydrophobic Silica Aerogel Synthesized from Rice Husk via Ambient Pressure Drying

Smart Self-Healing Materials: A Comprehensive Review of Emerging Technologies and Future Perspectives

Investigation into the Use of Locally Available Materials for the Production of Investment Casting Mould

Comparative CFD Analysis of Rib Architectures and Honeycomb Surfaces for Brake Drum Cooling

IMPACTS OF ROAD CONSTRUCTION SITE ACTIVITIES ON THE OCCURRENCE OF ACCIDENTS: A CASE STUDY OF THE ZARIA–KADUNA ROAD

Advancing Sustainable Urban Mobility: A Traffic-Related Air Quality Assessment at Major Road Intersections in Kano Metropolis, Nigeria

Performance Evaluation of Model Reference Adaptive Control for String Stability in Heavy-Duty Truck Platooning

Production of Silica from Agricultural Wastes for Application in FCC/RFCC Catalyst Development: A Mini Review

Comparative Study of Thermal, Zeolite-Y Catalytic and Ni-Doped Zeolite-Y Catalytic Cracking of Gas Condensate

Biodegradable Structure-Directing Agents for Sustainable Synthesis of ZSM-5 Zeolite: A Review of Amino-Acid and Biopolymers Routes

Density Functional Theory Investigation of Methane Steam Reforming on Ni(111) and Pd1–Cu(111) Single-Atom Alloy Surfaces

DESIGN AND FABRICATION OF A 5 BSPD PILOT-SCALE SEMI-REGENERATIVE CATALYTIC NAPHTHA REFORMING UNIT

Moisture-dependent engineering properties of beedi bambara groundnut (Vigna subterranea (L.) Verdc.) for post-harvest processing design

PRELIMINARY SCREENING AND CHARACTERIZATION OF α-CELLULOSE EXTRACTED FROM COTTON STALK, SUGARCANE BAGASSE, AND SAWDUST USING ALKALINE PRETREATMENT

Screening and identification of significant process parameters for solid state fermentation of Trichoderma Harzianum

Silica-Based Matrices for Microbial Cell Encapsulation and Immobilization: A review

Engineering Sustainable Solid Biofuels for Nigeria's Clean Energy Transition: Comparative Performance Evaluation of Individual and Blended Agro-Residue Briquettes

Process Design, Simulation and Performance Evaluation of a 5 BPD Indigenous Kerosene Hydrotreater for Local Refining Capacity Development

Optimization of Organosolv Lignin Extraction from Groundnut Shell for Adhesive Precursor Applications

Upscaling Sustainable Colouration: Design, Fabrication, and Performance Evaluation of an Industrial-Scale Natural Indigo Extraction Machine for Nigeria’s Textile Sector

Preparation of a Porous Waste Expanded Polystyrene/Bamboo Fibre Nanocomposite Material for CO2 Capture

Measurement of Liquid Film Height in Gas-Liquid Two-Phase Flows Using Twin-Wire Conductance Probes

Engineering Sustainable PCL/PLA/HAp-Sr/Keratin Fibre Biopolymer Composites for Bone Tissue Engineering Applications: Mechanical and Chemical Properties

Enhancing soybean thresher performance: A Taguchi design of experiments approach to modeling threshing and cleaning efficiencies

A comprehensive review on the poultry brooding requirements and forced air methods of heat generation for brooding.

Solar-Biomass Hybrid Systems for Integrated Livestock-Horticulture Farms in Sub-Saharan Africa: A Review

Development and Performance Evaluation of a manually operated single raw multi-purpose weeder

Bioelectricity Generation and Nutrient Removal from Landfill Leachate Using Double-Chamber Microbial Fuel Cells

Influence of Plastic Waste Morphology on the Compaction Properties of Marginal Lateritic Soil

Intelligent Energy Management in Agriculture: A Systematic Review of Internet of Thing, Renewable Integration, and Artificial Intelligence Techniques

Enhanced Anaerobic Digestion of Cow Dung and Poultry Dung Via a Coupled Microbial Electrolytic Cell: Optimization, Kinetics, and Thermodynamic Studies.

Experimental Evaluation of a solar dryer integrated with a carbon dot-enhanced shea butter phase change material (PCM).

development and characterization of carbon dot (CD)-enhanced shea butter as a phase change material for thermal energy storage.

MASS AND ENERGY ASSESSMENT OF THE PYROLYSIS OF LOW LIPID MICROALGAE (DUNALIELLA SALINA)

Awareness, Barriers, and Enablers of Circular Economy Adoption in Abuja's Construction Sector: A Survey-Based Assessment

UNLOCKING ECONOMIC DIVERSITY: THE STRATEGIC ROLE OF THE METALS INDUSTRY